introducing sKit 1.4 (beta)

Hi folks.

I worked a little on sKit to make it more convenient and stable.

* most of the tweaks get automatically installed now
   no real need to dig into the Audio Streaming series anymore. 

* sKit-manager remove function - removes everything from now on
   there shouldn't be any sKit trace left anymore once that is done.

What's basically left for to you do is

  1. you install a fresh pCP image,
  2. increase it to at least 200MB, 
  3. configure your audio interface via WEB-UI and
  4. install sKit

 At that point you should have a well tuned system up'n running.

On 1.4 I added some changes to the affinity tweak. I now assign squeezelite to
CPU 1 and 2 without isolating these CPUs anymore.

The documentation also got updated. And of course this or that error got corrected.

sKit 1.4 needs a fresh pCP install as base. Using sKit-manager update won't work. Sorry for that.

sKit 1.4 is still beta. I'll wait for 2 weeks for feedback before officially releasing sKit 1.4. I count on your feedback.


Enjoy.




9 comments:

  1. arober006May 28, 2021 at 10:37 AM

    Tested 1.4 for a week now. No troubles at all.

    ReplyDelete
  2. AnonymousJune 6, 2021 at 1:28 PM

    It is running well, but IMHO the version with isolated CPU for squeezelite sounds better, so i am back to 1.1. Maybe it will be possible to have a choice between isolated and not isolated version ? I am using Pi4 with KTB.
    Thanks for this great tweak.
    :)

    ReplyDelete
    Replies
    1. soundcheck (aka Klaus)June 6, 2021 at 8:45 PM

      Thx for the feedback. In my setup things became unstable under certain conditions. That's why I left the isolation for the main process out.
      sKit settings can be overridden by changing parameters in the pCP WEB-UI.
      There's no need to fall back to older versions.

      Delete
    2. HellRiderJune 9, 2021 at 3:59 PM

      Wouldn't that interfere with "-A" argument?

      Delete
    3. soundcheck (aka Klaus)June 9, 2021 at 6:28 PM

      "-A" takes care of the output thread only. You're looking at the rest.
      No interference.
      You can also take out "-A" and configure all the assignments manually through pCP-WEBUI. I am not sure though if Paul has fixed the issues around CPU isolation and task affinities. You need to make sure that this is done. Good luck.

      Delete
  3. AukeJune 14, 2021 at 2:35 PM

    I have a rPi 3B± a Pi2aes HAT and use wifi. If i use CPU isolation 3. My rpi gets unstable loses connections with the server. Also the pCP WEB-UI is gone. Sometimes it comes back after some time, but mostly i have to restart.

    Other little thing i have hdmi off but
    sKit-check.sh reports its on.

    ReplyDelete
  4. HellRiderJuly 14, 2021 at 11:09 AM

    Hello there,
    I see there is a fresh pCP 8.0.0 available. Will the sKit work? I have no idea if anything relevant from the sKit standpoint has changed from 7.0.0 to 8.0.0.

    Sorin

    ReplyDelete
    Replies
    1. soundcheck (aka Klaus)July 14, 2021 at 11:56 AM

      After looking at the changelog of pcp8.0, I concluded sKit should work. Anyhow. I'll run a check soon.

      Delete
    2. HellRiderJuly 14, 2021 at 7:27 PM

      I can confirm, uninstalled sKit, performed and in-situ update from 7.0.1 to 8.0.0, reinstalled sKit, all ok.

      Delete

Subscribe to: Post Comments (Atom)